The main problem
is about railway track crack detection at the earliest to avoid accidents.
Therefore it is essential that such problems must be communicated immediately
to the concerned authorities by using GSM technology for appropriate action.
This project
uses a microcontroller from 8051 family. The primary objective of this project
is to detect the crack in the railway track and alert the nearby station
through effective and highly reliable communication mode. To demonstrate this
project, two rails forming the part of the track are made using a pair of wire
which is wired with a detachable jumper in between each wire/track. Removing
the detachable jumper creates a fault in the respective track; otherwise it is
generally shorted by the jumper wire to simulate healthy track condition.
Removing the
jumpers result in driving transistors delivering a different logic to the
controller. The program thereafter takes over to send an SMS through GSM modem
interfaced through MAX232 level shifter IC to the microcontroller. An LCD is
also interfaced with the MC to display the status of GSM and track condition.
Thus the proposed model is designed to recognize the cracks in the railway
tracks and provides instant information to the concerned railway authorities. The power supply consists of a step down transformer
230/12V, which steps down the voltage to 12V AC. This is converted to DC using
a Bridge rectifier. The ripples are removed using a capacitive filter and it is
then regulated to +5V using a voltage regulator 7805 which is required